Setting Menu Items; Top Menu; Operation Menu - Panasonic AKHCU200 Operating Instructions Manual

Setting menu items

TOP MENU

This is the first screen displayed when you hold down the MENU button .
Select one of the menus .
TOP MENU
O P ERATION
M A INTENANCE
z OPERATION
z
Select this to open the OPERATION menu screen .
z MAINTENANCE
z
Select this to open the MAINTENANCE menu screen .

OPERATION menu

This is the selection screen for the OPERATION menu .
Moving the cursor to the "OPERATION" menu title and then pressing the
SELECT dial redisplays "TOP MENU" .
OPERATION
S E TTING1
S E TTING2
H D /SD PHASE
B A R ID
I N COM/MIC
z SETTING1
z
Select this to display the SETTING1 screen .
z SETTING2
z
Select this to display the SETTING2 screen .
z HD/SD PHASE
z
Select this to display the HD/SD PHASE screen .
z BAR ID
z
Select this to display the BAR ID screen .
z INCOM/MIC
z
Select this to display the INCOM/MIC screen .
z SETTING1 Screen
z
This is the selection screen for the SETTING1 menu .
Moving the cursor to the "SETTING1" menu title and then pressing the
SELECT dial redisplays the OPERATION menu one level up .
SE TTIN G1
CCU MO DE
SDI RE TURN 1
SDI RE TURN 2
SDI OU TPUT 1&2
SDI OU TPUT 3&4
NO RMAL /PM
COM POS ITE
NO RMAL /PM
indicates the factory default setting .
Setting
Item
value
CCU MODE 59 .94 Hz:
1080/59 .94i
1080/50i
50 Hz:
1080/59 .94i
1080/50i
SDI RETURN1 HD
SD
SDI RETURN2 HD
SD
SDI OUTPUT1&2 HD
SD
SDI OUTPUT3&4 HD
SD
SDI OUTPUT3&4 NORMAL
NORMAL/PM PM
COMPOSITE NORMAL
NORMAL/PM PM
z When the SDI OUTPUT3&4 NORMAL/PM item and COMPOSITE
z
NORMAL/PM item are set to "NORMAL", the menus and statuses will
not be able to be displayed because the picture monitor images will
not be output .
When one of items is set to "NORMAL", the other one is set to "PM"
as both of the items cannot be set to "NORMAL" .
1 080/ 59. 94i
HD
HD
HD
HD
PM
PM
Remarks
Set the format of the signal to be output
from the unit .
Set the format of the return signal to be
input to [HD/SD SDI 1] of the RETURN
IN connectors .
Set the format of the return signal to be
input to [HD/SD SDI 2] of the RETURN
IN connectors .
Set the format of the signals to be
output from [1] and [2] of the HD/SD
SDI OUT connectors .
Set the format of the signals to be
output from [3/PM] and [4/PM] of the
HD/SD SDI OUT connectors .
Set the signal to be output from [3/PM]
and [4/PM] of the HD/SD SDI OUT
connectors .
NORMAL:
Output the main line images .
PM:
Output the picture monitor images .
Set the signal to be output from
[OUT/PM] of the VBS connectors .
NORMAL:
Output the main line images .
PM:
Output the picture monitor images .
11