System Screen; Sd Card Screen - Panasonic AKHCU200 Operating Instructions Manual

Setting menu items
(Continued)
z SYSTEM Screen
z
This menu is used to initialize the menu settings .
Moving the cursor to the "SYSTEM" menu title and then pressing the
SELECT dial redisplays the MAINTENANCE menu one level up .
SYSTEM
I N ITIALIZE
Move the cursor to INITIALIZE, press the SELECT dial, turn the
SELECT dial to select "YES?", and press the SELECT dial to initialize
the menu settings .
The following data is initialized .
z Items in the OPERATION menu
z Items in the MAINTENANCE menu
(Excluding, however, the NETWORK screen, VERSION screen,
SYSTEM screen, and SD CARD screen .)
Furthermore, the setting information (following data) in the REMOTE
OPERATION menu* is also initialized .
z Items in the SD DETAIL menu
z Items in the SYSTEM menu
(Excluding, however, each of the HD BAR, MIC1 GAIN, MIC1 AMP,
MIC2 GAIN, and MIC2 AMP items .)
*: The REMOTE OPERATION can be operated with the ROP .
z SD CARD Screen
z
This menu is used to set the saving of data and upgrading of software
using a memory card .
Moving the cursor to the "SD CARD" menu title and then pressing the
SELECT dial redisplays the MAINTENANCE menu one level up .
z When data in a memory card is being processed, do not turn off the
z
power of this unit or remove the memory card until processing is
complete .
SD CARD
D O WNLOAD DATA
B ACK UP
L OG
U P LOAD DATA
B ACK UP
U P DATE
C A RD FORMAT
DOWNLOAD
DATA BACK UP
NO?
DOWNLOAD
LOG
UPLOAD DATA
BACKUP
UPDATE
CARD FORMAT
*: The REMOTE OPERATION can be operated with the ROP .
Move the cursor to the desired item, press the SELECT dial, turn the
SELECT dial to select "YES?", and press the SELECT dial to execute
the item .
Processing will not be possible if any of the following messages appears
at that time .
NO CARD
(A memory card is not inserted .)
WRITE ERROR
(Writing is not possible .)
WRITE PROTECT
(The memory card is write
protected .)
NO?
NO?
CARD FULL
(There is no space for saving .)
NO?
NO?
LOAD ERROR
(Reading is not possible .)
NO?
FORMAT ERROR
(Formatting is not possible .)
z When the DOWNLOAD DATA process is performed, "WRITING . . .Do
z
not turn off power until complete ." is displayed and then the "SAVE
OK" message is displayed when the process completes .
Item
Save this unit's setting information (following data) to
the memory card .
z Items in the OPERATION menu
z
z Items in the MAINTENANCE menu
z
(Excluding, however, the SYSTEM screen and SD
CARD screen .)
Furthermore, also save the setting information
(following data) in the REMOTE OPERATION menu* .
z Items in the SD DETAIL menu
z
z Items in the SYSTEM menu
z
(Excluding, however, each of the HD BAR, MIC1
GAIN, MIC1 AMP, MIC2 GAIN, and MIC2 AMP
items .)
Save the unit's log information to the memory card .
The data is for maintenance .
Save the setting information (following data) saved in
the memory card to this unit .
z Items in the OPERATION menu
z
z Items in the MAINTENANCE menu
z
(Excluding, however, the NETWORK screen,
VERSION screen, SYSTEM screen, and SD CARD
screen .)
Furthermore, also save the setting information
(following data) in the REMOTE OPERATION menu* .
z Items in the SD DETAIL menu
z
z Items in the SYSTEM menu
z
(Excluding, however, each of the HD BAR, MIC1
GAIN, MIC1 AMP, MIC2 GAIN, and MIC2 AMP
items .)
Upgrade the unit's software or programs with files
saved to the memory card .
Initialize the memory card .
Initialization may take about 5 minutes .
Error message
Insert a memory card .
The memory card is likely to be defective .
Replace the memory card .
Remove the memory card and unlock the
write-protection lock .
Delete any unnecessary data from the
memory card or replace the memory card
with a new one .
Data written with other than this unit
cannot be read .
The memory card is likely to be defective .
Replace the memory card .
Remarks
Measure
25