Description Of Menus; Items When The Operation Menu Is Selected - Panasonic AKHCU200 Operating Instructions Manual

Web settings
(Continued)
z Item setting operations (settings)
z
The current settings are displayed on the setting screen .
When you change a setting and then select the "SET" button on the
screen, the new value is reflected on the unit .
Notes
z When a setting has also been changed on the unit, the value that
z
was set last takes priority .
In a case like this, there may be a discrepancy in the values set .
z When a setting outside the setting range is selected using
z
keyboard input and the "SET" button is selected, the input check
will result in an error .
In a case like this, the setting item will be restored to its original
value .

Description of menus

„ Initial screen
„
This is the screen that appears first when a connection is established to
the URL you specified on the computer .
The menu for the "SETTING1" item on the "OPERATION" menu is
displayed .
Items when the OPERATION menu is
selected
Display the SETTING1 screen .
Display the SETTING2 screen .
Display the HD/SD PHASE screen .
Display the BAR ID screen .
Display the INCOM/MIC screen .
z SETTING1 Screen
z
indicates the factory default setting .
Setting
Item
value
CCU MODE 59 .94 Hz:
1080/59 .94i
1080/50i
50 Hz:
1080/59 .94i
1080/50i
SDI RETURN 1 HD
SD
SDI RETURN 2 HD
SD
SDI OUTPUT 1&2 HD
SD
SDI OUTPUT 3&4 HD
SD
SDI OUTPUT 3&4 NORMAL
(NORMAL/PM) PM
COMPOSITE NORMAL
(NORMAL/PM) PM
z When the SDI OUTPUT3&4 (NORMAL/PM) item and COMPOSITE
z
(NORMAL/PM) item are set to "NORMAL", the menus and statuses
will not be able to be displayed because the picture monitor images
will not be output .
When you set one of items to "NORMAL", set the other one to "PM" .
When you set both of the items to "NORMAL", priority is given to
the setting of the SDI OUTPUT3&4 (NORMAL/PM) item and the
COMPOSITE (NORMAL/PM) item is set to "PM" .
Remarks
Set the format of the signal to be output
from the unit .
Set the format of the return signal to be
input to [HD/SD SDI 1] of the RETURN
IN connectors .
Set the format of the return signal to be
input to [HD/SD SDI 2] of the RETURN
IN connectors .
Set the format of the signals to be
output from [1] and [2] of the HD/SD
SDI OUT connectors .
Set the format of the signals to be
output from [3/PM] and [4/PM] of the
HD/SD SDI OUT connectors .
Set the signal to be output from [3/PM]
and [4/PM] of the HD/SD SDI OUT
connectors .
NORMAL:
Output the main line images .
PM:
Output the picture monitor images .
Set the signal to be output from
[OUT/PM] of the VBS connectors .
NORMAL:
Output the main line images .
PM:
Output the picture monitor images .
27