Cobra 15 BAND XRS 9770 Operating Instructions Manual page 7

EasySet Programming
Your Detector
This EasySet programming menu lists all of the modes and settings you can
choose from after you have entered Program mode as described on page 7.
Mode Tone Display/Voice
Set Two beeps City X
IntelliShield
City mode
City X
One beep
default*
beep Off
City X+K
One beep
IntelliMute Two beeps IntelliMute On
mode
One beep IntelliMute Off
Set IntelliMute
One beep Set IntelliMute
RPMs
(see page 15
to set activation
point)
IntelliMute Pro
IntelliMute Two beeps
Pro mode On
IntelliMute Pro
One beep
Off
Auto Mute Two beeps AutoMute On
mode
One beep AutoMute Off
Set Compass
Set One beep
Compass
Pop Detect Two beeps Pop Detect On
mode
One beep Pop Detect Off
English
8
Result
A single beep sounds when the
signal is first detected.
Audio for all X band alerts are blocked
until signal strength reaches Level 3.
Combines the City X mode with prevention
of K band audio alerts
until signal strength reaches Level 2.
All alerts (except for strobe signals from
emergency vehicles) are automatically
muted below the
engine rev point you set.
Normal operation.
Allows you to set the engine
rev point while using IntelliMute.
Note: Only shown if IntelliMute is Off.
All radar, VG-2 and Spectre detection is
turned Off below the engine rev set point.
Normal operation.
The audio volume of all alerts will be
automatically muted after four seconds for as
long as the signal is detected.
All alerts will sound at full volume
for as long as the signal is detected.
Allows you to calibrate the compass.
(see page 18 to calibrate compass)
Unit will detect Pop signals.
Unit will not detect Pop signals.
EasySet Programming
Your Detector
Mode Tone Display/Voice
VG-2 Detect Two beeps VG-2 Detect On
mode
VG-2 Detect Off
One beep
VG-2 Audio On
VG-2 Audio Two beeps
mode (not
shown if VG-2
VG-2 Audio Off
One beep
detect is Off)
Spectre Two beeps Spectre
Detect mode
Detect On
One beep Spectre
Detect Off
Spectre Audio Two beeps Spectre Audio
mode (not On
shown
One beep Spectre Audio
if Spectre
Off
detect is Off)
SmartPower Two beeps SmartPower On
mode
One beep SmartPower Off
X Band Two beeps X Band On
Detect mode
X Band Off
One beep
K or Ku Band On Unit will detect K or Ku Band signals.
K or Ku Band Two beeps
Detect mode
One beep K or Ku Band Off Unit will not detect K or Ku Band signals.
Set display Two beeps Display Dim
Dim mode
One beep Display Dimmer More dimmed for dusk or night driving.
default*
Display Dark
One beep
Restore factory One beep Restore Factory
settings
Settings
Exit program One beep EXIT PROGRAM
* The settings for these user modes can also be changed with
the one button method.See description of each user mode
(pages 10 and 25) for details.
Result
Unit will detect VG-2 signals.
Unit will not detect VG-2 signals.
With VG-2 Detect On, the unit will give
audible alerts for VG-2 signals.
With VG-2 Detect Off, the unit will give
only visual alerts for VG-2 signals.
Unit will detect Spectre I & IV+ signals.
Unit will not detect Spectre I & IV+
signals.
With Spectre Audio On, unit will give
audible alerts for Spectre signals.
With Spectre I Audio Off, unit will give only
visual alerts for Spectre I & IV+ signals.
SmartPower is On.
SmartPower is Off.
Unit will detect X Band signals.
Unit will not detect X Band signals.
Partially dimmed for dusk or night driving.
Display is Off.
Resets user modes and settings to factory
default.
Allows you to exit Program mode.
Nothing Comes Close to a Cobra 9
®