Clover CDR 4170 Instruction Manual page 54

7. PRINT
•
Click the PRINT button to print the current pictures shown on the GUI and then the
following window pops up along with "WAIT...". Please wait a couple of seconds
until the system loads data to print.
8. REC
•
Click the REC button to start or stop recording. User can switch ON or OFF
recording from a remote location through the network when the DVR is in the
recording mode.
•
When the system is in the recording mode, the button will turn red in color.
•
If not recording, the button turns green in color.
9. CHANNEL SELECTION BUTTONS
•
You can see a channel in full screen by clicking one of the channel selection
buttons.
Select Channel
Reset button
- 49 -