Hitachi VT-FX980EUKN Instruction Manual page 94

Connection
Connect the set and cables as shown below but do not connect the VCR to the mains power supply just yet.
Otherwise auto installation will not work.
Do not connect to the
mains supply socket
before connecting all
leads, refer to page 3
VCR
AC Outlet
AC 230V, 50Hz
Mains Lead
Please use a scart lead (not supplied)
to get even better picture and sound
quality.
When viewing pictures on your TV,
press VCR/TV button of the remote
control handset so the VCR indicator
lights in the VCR display.
DECODER SET
Satellite box or satellite
receiver. Refer to the
diagram below for the
position in which the satellite
receiver should be installed.
SCART
SOCKET
RF OUT
Aerial cable
(supplied)
satellite receiver position
VIDEO LINK
VIDEO LINK CA
Note: Install the satellite receiver so its infrared
receiver is not more than 15 cm away from the
VCR infrared transmitter.
– 2 –
Aerial Lead
AERIAL
Infrared receiver
REV
TAPE
NAVIGATION
COMMERCIAL ADVANCE
REC/
PROG IRT
Infrared transmitter
Aerial
TV set
To Aerial IN
FWD