Hitachi VT-FX980EUKN Instruction Manual page 5

Section-1
Connection
This tells you how to connect your VCR to an aerial, TV, etc.
Customer Controls
This tells you the location and the detailed functions of the
switches, buttons, VCR display and connection terminals on the
VCR.
Remote Operation
This tells you how to insert batteries into the remote control
handset and how to operate your VCR remotely.
Auto Installation Function
This tells you how to automatically tune in all broadcast
channels and set the clock and date.
Pre-tuning of Built-in TV Tuner
This VCR incorporates a complete TV tuner (just like your
normal TV) and can be pre-tuned to receive up to 49 TV
programmes.
To preset satellite programmes, see page 73.
Auto Clock Setting using PDC signal and
Setting the Clock Manually
The clock display area in the VCR display panel will look like
"– –:– – " until you set the 24-hour clock. The clock must be set
to the correct time before you can programme the VCR for
timer recording and instant recording timer.
This section explains the two clock setting methods.
A. Setting the VCR clock automatically using a PDC signal.
B. Setting the remote control clock, then transferring the set
time to the VCR to set the VCR clock.
Cassette Tapes
This tells you how to insert and remove a cassette, and how to
protect recordings from accidental erasure.
Setting Up
Pages 6 — 7
Pages 8 — 9
Page 10
Page 11
Pages 13 — 18
Pages 19 — 20
Page 21
5