Hitachi VT-FX980EUKN Instruction Manual page 43

Tape Navigation Operation
Controls
1
2
3
Blank
Mark showing
that you have
previously
viewed the
programme.
Genre mark
Programme No.
Tape remaining
Interpreting the TAPE NAVI Data Menu
Tape Number
Number of Programmes
Tape Bar
View Mark
Genre Mark
Blank
Tape Remaining
Operating Guide
TV Screen
REV
TAPE
NAVIGATION
COMMERCIAL ADVANCE
REC/
IRT
PROG
REC/IRT
TAPE NAVIGATION button
No 5 T A P E N A I V P R O G 3
DATE CH START M I N
BLANK 1 9SP
1 / 4 4 2 1 1 : 0 0 2 0 LP
2 1 0 5 L 1 1 7 : 0 0 1 5SP
/
3 2 0 / 7 2 2 1 5 : 1 5 3 0 LP
REMA I N 1 6SP 1
SOAP 0 2 SP
Exit
SELECT & / / 6 NAVI
Tape No.
Tape Bar
No 5 T A P E N A I V
DATE CH START
BLANK
1 4 4 2 1 1 : 0 0
/
2 1 0 / 5 L 1 1 7 : 0 0
3 2 0 7 2 2 1 5 : 1 5
/
REMA I N
SELECT & / /
Operating Guide
Identifies the tape in the VCR.
Shows the number of programmes recorded on the tape.
Shows the approximate length of specific recorded programme and its
location on tape.
Shows that you have already watched more than half of a recorded
programme from the start.
Select and attach genre marks to record programmes to identify them.
Shows the blank (non-recorded) section of tape and the remaining
recording time on tape.
Shows the remaining of non-recorded section of tape and the remaining
recording time on tape.
Shows the button names and operations that can be done when the TAPE
NAVI data menu is being displayed.
Cassette with Tape Navigation data
Insert a cassette recorded on this VCR.
FWD
The VCR will check the Tape Navigation data. The
TAPE NAVIGATION button will flash for a few
seconds, and then change to steady lighting if the
VCR has recognised the tape.
Press the TAPE NAVIGATION button on the VCR
or the NAVI button on the remote control.
The tape data menu will appear on the TV screen.
Note: If the cassette in the VCR does not have
Tape Navigation data, refer to "Cassette without
Tape Navigation data" on page 44.
Press the buttons displayed in the menu to choose
the operation you want.
P R O G 3 No. of Programmes
m i n
1 9SP
Recording Date (day/month),
2 0 LP Recorded Channel,
Recording Start Time,
1 5SP
Recording Length,
3 0 LP
Recording Speed
1 6SP 1
SOAP 0 2 SP
Exit
6 NAVI
43