6
Complete the Local Settings fields.
Note: Use the scroll bar to access all of the fields on this screen.
SIP Local Port—Enter the port used for incoming and outgoing call control
signaling.
RTP Local Port—Enter the lowest value allowed for the port range to be used
for incoming and outgoing RTP streams.
7
Click Save Changes to save the information or Cancel to return to the
dashboard.
Service
This tab allows you to configure call forward features for subscriber line 1 and 2
separately. Enter some commonly used numbers into speed dial entry list and enter
the numbers you don't want to be disturbed into call block entry list, those 2 entry
lists take effect on subscriber line 1 and 2 simultaneously.
Complete the following steps to configure the Service parameters for your VoIP
settings.
1
From the TES301 dashboard, click the Change Settings button located in the
VoIP Settings cell.
4038767 Rev A
VoIP Settings
31