Multi-Function Display - Ferrari F430 Owner's Manual

Hide thumbs Also See for F430:
Table of Contents

Advertisement

Multi-function display

9 - Multi-function display
Incorporated in the instrument panel, its
function is to diagnose and signal any
faults; it may have the following colours:
Green
= Normal driving conditions
Red
= When a fault occurs
Amber
= When one of the available systems
has been activated
Multi-function display signals
The multi-function display shows symbols
relative to fault conditions and the state of
the vehicle.
If more than one fault occur at the same
time, they are displayed for a length of time
depending on their priority.
The signals of the tyre pressure monitoring
system (optional) that may appear on the
multi-function display are described on
126.
The following symbols may be displayed:
Check OK
When the ignition key is turned
to Position II, the electronic
system runs a diagnostic check
of the vehicle and, if no faults
are found, the symbol
OK
comes on to indicate that the
vehicle can be started.
34
Fuel tank flap open
Indicates that the fuel tank flap is
open or not properly closed.
Outside temperature
If selected with the relevant
button, it displays the outside
temperature.
Clock
Displays the time in standard
mode. It can be disabled with the
multi-function button (see
40).
If the battery is removed, the exact time will
have to be reset using the multi-function
buttons (see
page
CST active
While driving, it indicates that
page
the CST has cut in.
CST inactive
Indicates a malfunction or
that the CST system has been
deactivated with the switch on
the steering wheel (see
Check
Low fuel
Indicates that 18-20 litres
(3.96–4.4 Imp.Gall.) of fuel are
left in the tank or that the level
gauge is malfunctioning.
Fuel supply cut-off
Suspension system
Contact the Ferrari Service Network.
Instrument panel lighting
page
Slow Down
40).
Contact the Ferrari Service Network.
Hazard warning lights
page
24).
Indicates that the inertia switch
has tripped, in the event of an
accident, and that consequently
the fuel supply has been cut off.
While driving, it indicates a
malfunction in the suspension
system.
If selected with the relevant
button, it displays the adjustable
brightness level of the
instrument panel (see
page
40).
While driving, it indicates a too
high temperature in the exhaust
system (see
page
115).
Indicates temporary
malfunctioning of the electronic
differential (see
page
117).
If on, it signals that all the
direction indicators are on at the
same time.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents