Ferrari F430 SPIDER Owner's Manual page 72

Operating modes
Automatic
This mode automatically adjusts humidity
and ventilation according to the selected
temperature.
Manual
This mode allows manual adjustment of the
controls.
Functions and controls
Air conditioning control switch.

Air distribution control.

Temperature selection control.

Fan speed control.

Air recirculation switch.

10 13 11 9
72
Air conditioning control switch
Released
The air conditioner is on.
The air is cooled and/or only
dehumidified according to the
selected temperature.
Pressed (stop)
The air conditioner is off.
However, heating is still enabled
and will turn on according to the
temperature selected.
Air distribution control
It has three functions:
Automatic
The air flow distribution is
controlled by the electronic
12
system depending on the
ambient conditions and the
selected temperature.
Manual
The air flow is directed towards
four different areas.
Fast demisting/defrosting
Activates demisting and/or
defrosting of the windscreen and
the side windows.
Temperature selection control
This is used to set the desired
temperature in the passenger
compartment.
The end positions activate the functions
and (minimum and maximum air
LO HI
temperature).
Fan speed control
It has two functions:
Automatic
The air flow is controlled by the
electronic system according to
the selected temperature to be
reached and maintained.
Manual
The position ( ) turns the air
conditioning off and permits only
the intake of outside air when the
vehicle is moving.
The four positions allow selecting
the air flow rate.