Panasonic TOUGHBOOK CF-18NHHZXBM Service Manual page 48

7.2.16. Setting the Speaker and Dimm Lit
1. Fix the Speaker Angle to the DIMM Lit using the two
Screws <E>.
2. Connect the Speaker Cable to the Connector (CN37) of
the Main PCB.
3. Fix the DIMM Lit using the four Screws<D>. No1 to No4
Screws<D>:DRQT2+D2FKL
Screws<E>:DRHM5025YA
! Cautions for Setting the DIMM Lit
DIMM Lid Assy
DIMM Thermal Rubber
Allowable
right/left
displacement:
max. 1 mm
<D>:
No4
Speaker
Waterproof
Sheet
Speaker Unit
Speaker Washer
Speaker Cable
Tube
Speaker Angle
Connector (CN37)
Avoid catching
the Cable.
When removing the Bottom Case Assy,
be sure to remove the DIMM Lid Assy.
7-29
<D>:No1
<D>:No3
<D>:
No2
<E>
DIMM Lid
<E>
DIMM LID Sheet
DIMM Lid
Confirm the direction
of the Connector
when connecting.
Safety Working