Panasonic TOUGHBOOK CF-18NHHZXBM Service Manual page 33

7.2.5. Assembling the Anntena Cover, the Tablet Latch Cover and the LCD Rear Case
1. Fix the LCD Rear Case using the 10 Screws <X> and the
2 Screws <W>.
2. Attach the Antenna Covers and the Tablet Latch Cover to
the Display Unit.
3. Tighten the 8 Screws <V> on the back of the Display Unit.
4. Turn the Display Unit over, and tighten the 8 Screws. <V>
Screws <V> : DRQT26+E5FKL
Screws <W> : DXYN3+J10FNL
Screws <X> : DXYN2+J6FNL
! Assembly of LCD Front Case
LCD Front Assy
Magnet Assy
Magnet Tape
–1mm (Both on the top and the side)
Be free of overhang..
Be free of overhang..
TS Tape
Note for attachment
Ensure it does not come over the display part.
Don't get into a LCD indication range.
Attach and apply the load 30 to 40N (3.0 to 4.0 Kgf).
Position of pasting TS Tape.
0~0.5mm
0~0.5mm
<X>
<X>
<X>
<X>
Antenna Cover
<V>
<V>
<V>
<V>
<V>
<V>
<V>
<V>
<V>
<V>
<V>
<V>
Tablet Latch Cover
0~0.5mm
0~1mm
Magnet
Be free of overhang.
Place this to the ribs.
0~0.5mm
7-14
<X>
<W>
LCD Rear Case
<W>
<X>
<X>
<X>
<X>
<X>
<V>
<V>
<V>
Antenna Cover
<V>