Panasonic TOUGHBOOK CF-18NHHZXBM Service Manual page 29

! Assembly of Glass (Applicable Model : Digitizer Model)
Attach the surface to the LCD Front.
Be free of overhang..
Glass Assy
Detail of "A"
0~0.5mm
0.5~1.0mm
Glass Assy
AR Film
Attach it to the back side.
(Using the jig)
Paste this to backside.
Attach it at the center.
Dimensional tolerance: –0.2
Glass (Digitizer)
TS Spacer A
A
TS Spacer B
0.5mm TS Spacer A / TS Spaser B:
Don't get into a LCD indication range.
TS Spacer A
7-10
Attach so it comes at the center part
when the LCD Unit is completely assembled.
Protection Sheet
Attach it to the front side. (Using the jig)
Paste this to frontside.
Attach it at the center.
Dimensional tolerance: –0.2
0~0.5mm
Place this to the wall of cabinet.
0.5~1mm
–0.5mm
Fit this to the
TS Spacer B
line of cabinet.
LCD Side
Cushion B
0.5mm
–0.5mm
Fit this to the
0.5~1mm
line of cabinet.