Hitachi L100-M Series Addendum Manual page 12

12
Inverter Mounting and Installation
Preparing for Wiring
It is very important to perform the wiring carefully and correctly. Before proceeding,
please study the cation and warning messages below.
WARNING: "Use 60/75°C Cu wire only" or equivalent.
WARNING: "Open Type Equipment."
WARNING: "A Class 2 circuit wired with Class 1 wire" or equivalent.
WARNING: "Suitable for use on a circuit capable of delivering not more than 5,000
rms symmetrical amperes, 120 V maximum." For models with suffix M (such as
004MFU2).
HIGH VOLTAGE: Be sure to ground the unit. Otherwise, there is a danger of electric
shock and/or fire.
HIGH VOLTAGE: Wiring work shall be carried out only by qualified personnel. Other-
wise, there is a danger of electric shock and/or fire.
HIGH VOLTAGE: Implement wiring after checking that the power supply is OFF. Oth-
erwise, you may incur electric shock and/or fire.
WARNING: Do not connect wiring to an inverter or operate an inverter that is not
mounted according the instructions given in this manual. Otherwise, there is a danger of
electric shock and/or injury to personnel.