Motorola AP-51XX Product Reference Manual page 509

AP51xx>admin(system.snmp.traps)> show
Description:
Shows SNMP trap parameters.
Syntax:
show trap
rate-trap
Example:
admin(system.snmp.traps)>show trap
SNMP MU Traps
mu associated
mu unassociated
mu denied association
mu denied authentication
SNMP Traps
snmp authentication failure
snmp acl violation
SNMP Network Traps
physical port status change
denial of service
denial of service trap rate limit : 10 seconds
SNMP System Traps
system cold start
system config changed
rogue ap detection
ap radar detection
wpa counter measure
mu hotspot status
vlan
lan monitor
DynDNS Update
For information on configuring SNMP traps using the applet (GUI), see
Shows SNMP trap parameter settings.
Shows SNMP rate-trap parameter settings.
: enable
: disable
: disable
: disable
: disable
: disable
: enable
: enable
: disable
: disable
: disable
: disable
: disable
: disable
: disable
: disable
: enable
Enabling SNMP Traps on page 4-31.
8-175