Motorola AP-51XX Product Reference Manual page 403

AP51xx>admin(network.wireless.wlan)> create
Description:
Defines the parameters of a new WLAN.
Syntax:
create
show wlan
set ess
wlan-name
11a
11bg
mesh
hotspot
max-mu
security
acl
passwd
no-mu-mu
sbeacon
bcast
qos
add-wlan
Example:
admin(network.wireless.wlan.create)>show wlan
ESS Identifier
WLAN Name
802.11a Radio
802.11b/g Radio
Client Bridge Mesh Backhaul
Hotspot
Maximum MUs
Security Policy
MU Access Control
Kerberos User Name
Kerberos Password
Disallow MU to MU Communication
Use Secure Beacon
Accept Broadcast ESSID
<number> Displays newly created WLAN and policy number.
<essid> Defines the ESSID for a target WLAN.
<name> Determines the name of this particlular WLAN (1-32).
<mode> Enables or disables access to the access point 802.11a radio.
<mode> Enables or disables access to the access point 802.11b/g radio.
<mode> Enables or disables the Client Bridge Mesh Backhaul option.
<mode> Enables or disables the Hotspot mode.
<number> Defines the maximum number of MU able to operate within the WLAN
(default = 127 MUs).
<name> Sets the security policy to the WLAN (1-32).
<name> Sets the MU ACL policy to the WLAN (1-32).
<ascii string> Defines a Kerberos password used if the WLAN's security policy uses a
Kerberos server-based authentication scheme.
<mode> Enables or disables MUs associated to the same WLAN to not
communicate with each other.
<mode> Enables or disables the AP-51xx from transmitting the ESSID in the
beacon.
<mode> Enables or disables the access point from accepting broadcast IDs from
MUs. Broadcast IDs are transmitted without security.
<name> Defines the index name representing the QoS policy used with this
WLAN.
Apply the changes to the modified WLAN and exit.
:
:
: available
: not available
: not available
: not available
: 127
: Default
:
: Default
: ********
: disable
: disable
: disable
8-69