Table of Contents
Advertisement
4-26
AP-51xx Access Point Product Reference Guide
To configure SNMP v1/v2c community definitions and SNMP v3 user definitions for the access point:
1. Select
System Configuration
SNMP v1/v2c community definitions allow read-only or read/write access to access point
management information. The SNMP community includes users whose IP addresses are
specified on the
A read-only community string allows a remote device to retrieve information, while a read/
write community string allows a remote device to modify settings. Motorola recommends
considering adding a community definition using a site-appropriate name and access level.
Set up a read/write definition (at a minimum) to facilitate full access by the access point
administrator.
2. Configure the
community definitions, name the community, specify the OID and define community access.
Add
- >
SNMP Access
SNMP Access Control
SNMP v1/v2 Configuration
Click
Add
to create a new SNMP v1/v2c community definition.
from the access point menu tree.
screen.
field (if SNMP v1/v2 is used) to add or delete
Advertisement
Table of Contents
