Table of Contents
Advertisement
6-50
AP-51xx Access Point Product Reference Guide
Diffie Hellman Group Select a
4. Click
Ok
Settings
5. Click
Cancel
Settings
6.11.4 Viewing VPN Status
Use the
VPN Status
well as their lifetime, transmit and receive statistics. The VPN Status screen is read-only with no
configurable parameters. To configure a VPN tunnel, use the VPN configuration screen in the WAN
section of the access point menu tree.
To view VPN status:
1. Select
Network Configuration
menu tree.
Diffie-Hellman Group
agreement protocol allows two users to exchange a secret key over
an insecure medium without any prior secrets. Two algorithms
exist, 768-bit and 1024-bit. Select one of the following options:
•
Group 1 - 768 bit - Somewhat faster than the 1024-bit
algorithm, but secure enough in most situations.
•
Group 2 - 1024 bit - Somewhat slower than the 768-bit
algorithm, but much more secure and a better choice for
extremely sensitive situations.
to return to the VPN screen. Click Apply to retain the settings made on the
screen.
to return to the VPN screen without retaining the changes made to the
screen.
screen to display the status of the tunnels configured on the access point as
to use. The Diffie-Hellman key
->
WAN
->
VPN
->
VPN Status
IKE
IKE
from the access point
Advertisement
Table of Contents
