AP51xx>admin(system)>restart
Description:
Restarts the access point access point.
Syntax:
restart
Restarts the access point.
Example:
admin(system)>restart
********************************WARNING***********************************
** Unsaved configuration changes will be lost when the access point is reset.
** Please be sure to save changes before resetting.
**************************************************************************
Are you sure you want to restart the AP-51xx?? (yes/no):
AP-51xx Boot Firmware Version 2.0.0.0-xxx
Copyright(c) Motorola 2007. All rights reserved.
Press escape key to run boot firmware ........
Power On Self Test
testing ram
testing nor flash
testing nand flash
testing ethernet
For information on restarting the access point using the applet (GUI), see
: pass
: pass
: pass
: pass
Configuring System Settings on page
8-143
4-2.