Motorola AP-51XX Product Reference Manual page 276

6-58 AP-51xx Access Point Product Reference Guide
Add
Del (Delete)
Delete All
Any MAC
MAC Address
Any ESSID
ESSID
4. Click Apply
the screen without clicking Apply results in all changes to the screens being lost.
5. Click Undo Changes
settings displayed on the Rogue AP Detection screen to the last saved configuration.
6. Click Logout
logout before the applet is closed.
Click Add to display a single set of editable MAC address and ESS
address values.
Click the Delete
Rule Management field. The MAC and ESS address information
previously defined is no longer applicable unless the previous
configuration is restored.
Click the Delete All
Management field. All MAC and ESS address information
previously defined is no longer applicable unless the previous
configuration is restored.
Select the Any MAC
(whether it is a known device MAC address or not) from being
considered a rogue device.
Click Add, and enter the device MAC address to be excluded from
classification as a rogue device.
Select the Any ESSid
(whether it is a known device ESSID or not) from being considered
a rogue device
Click Add, and enter the name of a device ESSid to be excluded
from classification as a rogue device.
to save any changes to the Rogue AP Detection screen. Navigating away from
(if necessary) to undo any changes made. Undo Changes reverts the
to securely exit the Access Point applet. A prompt displays confirming the
button to remove the highlighted line from the
button to remove all entries from the Rule
checkbox to prevent a device's MAC address
checkbox to prevent a device's ESSID