Motorola G24 Guide Developer's Manual page 64

AT Commands Summary
AT Command
S102
+MSCTS
Error Handling Commands
+CMEE
+CEER
+MGEER
RS232 Multiplexer Commands
+CMUX
User Interface
+CRSM
&V
&W
&Y
+CKPD
+MKPD
+CMER
+CLAN
+CIND
+MHDPB
Unsolicited UI Status Messages
+CKEV
+MUPB
1-30
Table 1-1: AT Commands (Cont.)
Description
This S-register sets the value of the delay before sending the data to
the terminal.
This command defines the behavior of the CTS line when the G24 is
in Sleep mode.
This command enables/disables the use of result code +CME
ERROR: <err> as an indication of an error relating to the
functionality of the G24.
This command returns an extended error report containing one or
more lines of information text, determined by the manufacturer,
providing the reasons for the
call-clearing errors.
This command returns the PDP context activation reject cause.
This command is used to enable/disable the GSM MUX
multiplexing protocol stack.
This command provides limited access to the Elementary Files on
the SIM.
This command displays the current active configuration and stored
user profiles.
This command stores the user profile.
This command displays the default user profile.
This command emulates key presses, or virtual keycodes, as if
entered from the G24 keypad or from a remote handset.
This command enables accessories to control the press and release
of key presses.
This command enables an external accessory to receive key press
information from the G24's internal keypad.
This command handles the selection of language in the ME.
This command is used to query the status of various ME indicators.
This command is used to enable and disable the SEND/END
functionality of the headset dual-position button.
This command causes the G24 to send an unsolicited message when
a key is pressed on the G24 keypad, and local key press echo is
enabled.
This command causes the G24 to send an event when a phone book
entry is accessed or modified by the user.
AT Commands Reference Manual
Page
Page 3-286
Page 3-288
Page 3-289
Page 3-296
Page 3-299
Page 3-438
Page 3-302
Page 3-307
Page 3-308
Page 3-310
Page 3-310
Page 3-312
Page 3-314
Page 3-315
Page 3-316
Page 3-318
Page 3-320
Page 3-322
December 31, 2007