Mupb, Phone Book Event - Motorola G24 Guide Developer's Manual

UI (User Interface)
<ind>
6
7
8
12

+MUPB, Phone Book Event

This output is sent by the G24 when a phone book entry is accessed or modified.
Unsolicited Report
+MUPB: <event>,<index>,<ph_list>
The following table shows the +MUPB parameters.
Example
AT+MUPB=1
OK
+MUPB: 2,4."ME"//User modifies location 4
3-322
Table 3-212: +CIEV Parameters (Cont.)
Description <value> Range
SIM Pin 1 requested 0/1
SIM SMS full 0/1
GPRS coverage 0-2
SIM insertion/removal 0/1
indication
Command Type
Set
+MUPB=<n>
Table 3-213: +MUPB Parameters
<Parameter>
<n> 0
1
<event> The type of operation performed on the location
1
2
3
<index> Location number of the accessed entry
<ph_list> Phone list affected by the change
AT Commands Reference Manual
0 SIM pin ready
1 SIM pin required
0 SIM SMS storage is not full
1 SIM SMS storage is full
0 No GPRS coverage
1 GPRS coverage
2 EDGE coverage
Note: GPRS/EDGE coverage will be
detected only when SIM has GPRS
ability.
0 SIM card removed from phone
1 SIM card inserted into phone
Syntax Response/Action
OK
Description
Event reporting Off
Event reporting On
Stored (new)
Modified
Cleared
Explanation
December 31, 2007