+MGEER, GPRS Extended Error Report
This command is used to return the PDP context activation reject cause.
The reject cause may be because of unsuccessful PDP context activation initiated by the MS.
Command
Type
Set
Execute
Read
Test
December 31, 2007
Syntax
AT+MGEER=[<n>]
OK
or:
+CME ERROR: <err>
AT+MGEER
+MGEER: <cause>
OK
AT+MGEER?
+MGEER: <n>
OK
AT+MGEER=?
+MGEER: List of supported
<n>s
OK
AT Commands Reference Manual
Chapter 3: AT Commands Reference
Response/Action
Remarks
3-299