Manual Scope; Target Audience; Manual Organization - Motorola G24 Guide Developer's Manual

Preface

Manual Scope

This manual introduces the G24 AT commands, and describes how software developers can use
these commands to communicate with the G24 device, and to create software applications that
communicate with the G24 using these commands.
Note:

Target Audience

This manual is intended for software developers who communicate with the G24 device using the
AT commands, and create applications to communicate with the G24 device using the AT
commands.

Manual Organization

This manual contains the following chapters:
• "Preface"
liability notification.
• "Chapter 1: Product Features"
AT commands.
• "Chapter 2: Introduction to AT Commands"
and includes a general explanation of the command's format and usage. It also describes
supported character sets and error handling.
• "Chapter 3: AT Commands Reference"
including examples, where relevant.
• "Chapter 4: Using the Commands"
various G24 functionality, including G24 setup and connectivity, SMS, call control, data
calls, GPRS, Sleep mode, audio, TCP/IP, STK and MUX user integration.
• "Chapter 5: Tools"
application.
• "Appendix A: Reference Tables"
also provides an alphabetical list of all the AT commands.
• "Appendix B: MUX"
December 31, 2007
The integrator should read the corresponding SW release notes for the G24 version he is
using to get information about differences from this manual.
provides a scope for this manual, document convention, safety instructions and a
describes the PC Driver and PC Loader tools provided by the
describes the MUX's PREMUX and MUX states.
AT Commands Reference Manual
introduces the new product features and provides a list of the
provides an introduction to the AT commands,
provides a reference to all available AT commands,
provides scenarios and examples for implementing
provides conversions between different character sets. It
xxi