Distributor Installation; Ignition Coil (Mivec) - Mitsubishi 6A1 series User Manual

11A-6-2
REMOVAL AND INSTALLATION <MIVEC>
Removal steps
1. Spark plug cable
2. Ignition coil
3. Spark plug
Alignment mark
E
Mitsubishi Motors Corporation
6A1 ENGINE (E - W) -
25 Nm
3
INSTALLATION SERVICE POINT
"AA DISTRIBUTOR INSTALLATION
(1) Turn the crankshaft clockwise to bring the No. 1 cylinder
(2) Align the mark on the distributor housing with the mark
(3) Install the distributor while aligning the coupling key with
6AE0151
Feb. 1997
Ignition System
1
piston to the compression stroke top dead center.
on the coupling.
the keyway in the camshaft end.
PWEE9622
1.0 Nm
2