Hanna Instruments HI 720 Instruction Manual page 42

Conductivity process controller with inductive probe

Hide thumbs Also See for HI 720:

Table of Contents

Enlarged version

Recommendations for Users

Before using these products, make sure that they are entirely suitable for the environment in which they

are used. Operation of these instruments in residential areas could cause unacceptable interferences to

radio and TV equipment. To maintain the EMC performance of equipment, the recommended cables noted

in the user's manual must be used. Any variation introduced by the user to the supplied equipment may

degrade the instruments' EMC performance. To avoid electrical shock, do not use these instruments when

voltage at the measurement surface exceed 24 Vac or 60 Vdc. To avoid damage or burns, do not perform

any measurement in microwave ovens.

Unplug the instruments from power supply before the replacement of the fuse. External cables to be

connected to the rear panel should be terminated with cable lugs.

Table of Contents