Important Maintenance Items During Service Operations; Lubrication - Epson Stylus Pro 9000 Service Manual

EPSON Stylus Pro 9000
6.1.3 Important Maintenance Items During Service
Operations
Check the following items during printer maintenance/service and perform any
necessary operations.
Table 6-3. Items to be Checked During Maintenance/Service
Items Check Points
Lower Paper Guide Make sure no paper,
and the surface of the dust, or foreign objects
Subplaten are attached or have
accumulated.
Step Ruler Make sure no dust or
(Striped plastic sheet foreign objects are
used by Linear attached or have
Encoder to determine accumulated, and
CR position) make sure it is not
ripped, bent, or
stained.
Rail on the CR guide Make sure there are no
frame foreign objects
attached.
P_REAR sensor and Make sure no paper,
P_FRONT sensor dust, or foreign objects
surface are attached or have
accumulated.
Maintenance & Setup

6.1.4 Lubrication

In this product, there are no required lubrication parts.
Remedy
Cleaning (If there is an
ink stain, wipe with dry,
clean cloth after
cleaning the ink stain
with damp cloth.)
After attempting to
clean, if there are any
rips or stains, replace
with new one.
Cleaning
Cleaning
General Maintenance Issues
Therefore, never lubricate the printer mechanism
since the lubrication may damage the mechanical
parts and shorten the product life.
Revision B
148