EPSON Stylus Pro 9000
6.2.2 Contents of the Packaging
See the following for the contents of the large and medium size boxes.
MEDIUM-SIZE BOX
Parts packed in the medium-size box are as follows.
Legs x 2 (one for left and right)
Leg connections x 2 (for connecting the right and left legs / one each for
top and bottom)
Paper Eject Tray (Cloth/ metal shafts are attached inside)
Tray Hooks x 2 (one each for right and left)
Pins x 2
Hexagon (Allen) wrench x 2 (large: 5mm / small: 4mm)
Bolts (4 kinds)
For assembling the stand
* 8 bolts with hexagon hole (M6 x 30)
* 6 bolts with hexagon hole (M6 x 10)
For connecting the printer body and stand
* 2 washer bolts with hexagon hole (M6 x 12)
* 2 flange bolts with hexagon hole (M6 x 12)
Maintenance & Setup
LARGE BOX
The following parts are in the large box.
EPSON Stylus Pro 9000 printer body
2 Spindles for roll paper (for 2-inch diameter roll paper)
Accessory Box
* Ink Cartridges x 6 (one for each color)
* Roll paper
Documentation Box (Guide Books and CD-ROM, etc.)
Unpacking and Installing
Revision B
150