Control Panel Settings; Selectype Menu - Epson Stylus Pro 9000 Service Manual

EPSON Stylus Pro 9000

1.3.2 Control Panel Settings

To access the control panel settings, press the SelecType button while the
printer is not printing. The printer enters the SelecType mode and cannot print.
The following table lists LCD display messages in SelecType mode.
Table 1-15. Control Panel Settings
Display Message

SelecType Menu

Test Print Menu
Printer Status Menu
Paper Settings Menu
Cutter Replacement Menu
Head Alignment Menu
Selecting a menu provides you with detailed options.
Product Description
Menu
SelecType menu, page 22
Test Print Menu, page 23
Printer Status Menu, page 23
User Paper Settings, page 23
Cutter Replacement Menu, page 24
Gap Adjustment Menu, page 24
Control Panel
SELECTYPE MENU
Table 1-16. SelecType Menu
Display Message Item
Auto
PLATEN GAP
Thick
ON
PAGE LINE
OFF
Auto
Parallel
INTERFACE
MAC
Option
PARALLEL Compatible
INTERFACE ECP
PC437
CODE PAGE
PC850
Top/Bottom 15mm
ROLL PAPER
15mm
MARGIN
3mm
INITIALIZE PANEL Run
Notes:
* The printed image is the same size as a printed image using the 3mm setting; however, the
printer adds 12mm of paper clearance (for a total margin of 15mm) to the top and bottom edges
to make paper feeding more stable and to prevent the paper from rubbing the printheads.
Also, the underlined item equals the default.
Revision B
Notes
Adjusts the platen gap. (Normally, leave
set to Auto.)
When Auto Cut Off is selected on the
control panel, this setting determines
whether a line for manual cutting is
printed.
Determines which interface the printer
checks for data. Auto continuously checks
all interfaces and is good for normal use.
Determines the data transfer rate when
using this interface.(Normally, leave set to
Compatibility.)
Character code setting. (PC437:
expanded graphics/PC850: multi-lingual)
Roll sheet margin setting.
• Top/Bottom 15mm*: the top and bottom
margins = 15mm while left and right
margins = 3mm
• 15mm: all margins = 15mm
• 3mm all margins = 3mm
Initialize control panel setup values
22