Cr Motor Assembly Removal - Epson DLQ-3000 Service Manual

DLQ-3000+

3.2.6.6 CR Motor Assembly Removal

Step 1) Remove the printer mechanism. (See Section 3.2.6.1.)
Step 2) Remove 1 extension spring (3275) on the top edge of the printer mechanism to
loosen the timing belt.
Step 3) Remove 1 screw (CBS, 3X6) securing the grounding plate for the external cooling
fan FFC, and remove the grounding plate for the FFC.
Step 4) Remove 4 screws (CS, 3X16) securing the CR motor assembly to the CR frame
and 1 screw (CBS, 3X6) securing the CR motor grounding plate to the CR frame.
Then remove the CR motor assembly.
Perform "Bi-D adjustment" after replacing the CR Assembly or removing/replacing the
timing belt.
3-16
Figure 3-17. CR Motor Assembly Removal
Figure 3-18. CR Motor Assembly Removal
WORK POINT
Rev. A