Changing The Hook-Thread Bobbin - Duerkopp Adler 868 Instruction Manual

6.8

Changing the hook-thread bobbin

22
1
Caution: danger of injury !
Turn off the main switch.
The hook-thread bobbin may only be changed with the machine
switched off.
Removing the empty bobbin
–
Raise the sewing foot.
–
Pull the hook cover 1 upwards and open it.
–
Lift the flap 5 and remove the empty bobbin 2.
Inserting a full bobbin
–
Insert the full bobbin 2 so that it moves in the opposite direction
of the hook when unwinding.
–
Conduct the hook thread through the slot 3 and underneath the
spring 4.
–
Pull the hook thread through the slot 7 and continue pulling until it
stands out about 4.5 cm.
–
Close the flap 5 and pull the hook thread through the thread
guide 6 of the flap.
7 6 5 4 3 2