6.8.4
Connecting the sockets of the DA321G control unit
6.8.5
Connecting the DA321G control unit
2
1
–
Plug the cable from the controller (pedal) into socket B80 of the
controls.
–
Plug the cable from the motor sensor 1 into socket B2 of the
controls.
–
Plug the cable 2 from the motor into socket B41 of the controls.
–
Plug the cable to the sewing machine into socket A of the control
unit.
–
Lay all cables through the cable duct.
–
Plug the cable from the control panel (if present) into socket B776.
29