Electrical Connection; Connecting The Control Unit - Duerkopp Adler 506-3 Installation Instructions Manual
Hide thumbs
Also See for 506-3:
- Operating instructions manual (24 pages) ,
- Service instructions manual (52 pages) ,
- Parts list (78 pages)
Table of Contents
Advertisement
3. Electrical Connection
3.1 Connecting the Control Unit
ATTENTION !
All work on the electrical components of the sewing unit may be
carried out only by electricians or appropriately trained personnel.
The mains plug must be pulled.
The instruction manual of the drive's manufacturer must
imperatively be respected!
1
–
Screw the operating panel 1 together with its bracket 2 onto the
control unit 3.
3
2
2
5
Advertisement
Table of Contents
