Fitting The Sewing-Drive Control For Machines With Efka Dc 1550 / Da 321G; Fitting The Set Value Initiator - Duerkopp Adler 868 Instruction Manual
Hide thumbs
Also See for 868:
- Parts list (88 pages) ,
- Instruction manual (41 pages) ,
- Service instructions manual (66 pages)
Table of Contents
Advertisement
4.5
Fitting the sewing-drive control for machines with Efka DC 1550 / DA 321G
4.6
Fitting the set value initiator
8
7
2
–
Fix the sewing-drive control 1 with 4 screws underneath the table
plate 2.
–
Fix the power supply cable of the sewing-drive control with the
traction relief clip 3 underneath the table plate.
–
Screw angle 7 under the table plate 8.
–
Screw the set value initiator 2 onto the angle 7.
1
11
Advertisement
Table of Contents
