Disassembly and Assembly
Removing
3.2.4.1
the PF Motor
1. Remove the printer mechanism (see Section 3.2.4).
2. Remove the platen grounding spring thatsecures theplatenshaft (see Section 3.2.4.3).
3. Remove the CBB (M3 x8) screw attaching the PFmotorto the nghtframe.
4. Release the clip holding the PF motor assembly from the right frame.
5. Remove the PF motor from the right frame.
3-1o
Figure 3-9. Removing the
PF
Motor
PF Motor
"