Epson LQ-300 Service Manual page 83

After printing is complete, the following message appears on the display:
11.
From the 5 rows of draft patterns, find the row in which the vertical lines in the H are best
aligned, then enter the value assigned to that row. The following figure is an example of the
After you enter the value for draft, the following message appears on the display:
12.
From the 5 rows of LQ patterns, find the row in which the vertical lines in the H are best
aligned, then enter the value assigned to that row.
13. The printer lets you check your print pattern selection for confirmation following steps 9 and
10 by printing one row of the pattern you selected.
14. After the printer prints check patterns for confirmation, the following message appears on the
display:
If Bi-D is correct, press "Y" and the Enter key, and
15. If your printed pattern is aligned vertically, press Y and
adjustment. Otherwise, press N to return to step 11 to specify another adjustment value.8.
Enter. –
Enter
Adjustments
to complete the Bi-D
4-5