Peripheral Component Interconnect (Pci) Slots - HP Xw8200 - Workstation - 1 GB RAM Technical Reference Manual

Install the first matched DIMM pair in socket set A.
Install subsequent matched DIMM pairs in sets B, then C, and lastly D (farthest from power supply).
The BIOS generates warnings/errors on invalid memory configurations.
In DDR2 mode, dual-rank DIMMs are placed farther from the Memory Controller Hub (MCH) than
single-rank DIMMs.
If there is no way to obtain a valid memory configuration by disabling some of the plugged-in memory,
the BIOS will halt with a diagnostics 2004 code for memory error (4 beeps/blinks).
If the BIOS can find a valid memory configuration by disabling some of the plugged-in memory, it will
do so and will report a warning during POST ("215-mismatched memory"). The system can still be
booted in this condition.

Peripheral Component Interconnect (PCI) Slots

Table 4-4 PCI Slot Types
Slot
1
2
3
4
5
6
78 REMOVAL AND REPLACEMENT PROCEDURES
1
A
2
5
C
6
Type
PCI
PCI Express x16
PCI
PCI Express x4
PCI-X 133
PCI-X 100
SIDE CLOSEST TO PCI SLOTS
Ref
J21
J41
J20
J31
J22
J23
3
B
4
7
D
8
1
2
3
4
5
6
7