H Additional Password Security And Resetting Cmos; Resetting The Password Jumper - HP Xw8200 - Workstation - 1 GB RAM Technical Reference Manual

Hp workstation xw8200 service and technical reference guide (complete_version)
Hide thumbs Also See for Xw8200 - Workstation - 1 GB RAM:
Table of Contents

Advertisement

Appendix H
and Resetting CMOS
This workstation supports security password features, which can be established through the Computer Setup
Utilities menu. These features are:
setup password
power-on password
When you establish only a setup password, the power-on password is required to access Computer Setup and any
other information on the workstation. When you establish both passwords, only the setup password will give you
access to Computer Setup.
When both passwords are set, the setup password can also be used in place of the power-on password as an
override to log in to the workstation. This is a useful feature for a network administrator.
If you forget the password for the computer, there are two method for clearing that password so you can gain
access to the information on the workstation.

resetting the password jumper

using the Clear CMOS button
CAUTION
Pushing the CMOS button resets CMOS values to factory defaults and erases any customized
information including passwords, asset numbers, and special settings. It is important to back up the
workstation CMOS settings before resetting them in case they are needed later. To back up the CMOS
settings, use Computer Setup and run the Save to Diskette option from the File menu.
Resetting the Password Jumper
To disable the power-on or setup password features and clear the power-on and setup passwords:
1
Shut down the operating system and then turn off the workstation and any external devices. Disconnect the
power cord of the workstation and any external devices from the power outlets.
2
Disconnect the keyboard, monitor, and any other external devices that are connected to the workstation.
WARNING!
To reduce the risk of personal injury from electrical shock and hot surfaces, be sure to
disconnect the power cord from the wall outlet and allow the internal system components to cool before
touching.
Additional Password Security
RESETTING THE PASSWORD JUMPER 173

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents