Creating Multiple-Line Labels; Using Mixed Formats - Dymo LabelManager 350D User Manual

DYMO
DYMO
DYMO
DYMO
DYMO DYMO
DYMO DYMO
DYMO
DYMO
DYMO
DYMO
DYMO
DYMO
DYMO
DYMO
DYMO
DYMO
DYMO
DYMO
To set the box style
1. Press the key.
2. Use the arrow keys to move to the desired box style and
H
then press .
On two-line labels, both lines are underlined. However, both
lines are enclosed in a single box for the box styles.
Underline
Square Box
DYMO
DYMO
DYMO
Pointed Box
DYMO
Rounded Box
DYMO
DYMO
DYMO
Crocodile Box
DYMO
Scroll Box
3D Box
Dots
Wood Grain
Bricks
Checkers
Parquet
Diamonds
Weave
Figure 8

Creating Multiple-Line Labels

The number of lines you can print on a label depends on the
DYMO size label tape you are using:
•
DYMO
Maximum of three lines on 19 mm labels
DYMO
•
DYMO
Maximum of two lines on 9 mm and
12 mm labels
•
Maximum of one line on 6 mm labels
To create a multiple-line label
1. Type the text for the first line, and press
A new line character ë is placed at the end of the first line
in the display, but will not print on the label.
2. Type the text for the second line.
The display shows the line on which you are currently
entering text. The example below indicates that the second
line is the current line on the label.
3. Use the arrow keys to move from one line to another.

Using Mixed Formats

You can apply different fonts and format styles to the text on
a label by dividing the label into blocks of text or pages. Each
page is separated by a page break.
The number of lines that can be added to a page is determined
by the label width. You can add two page breaks to a label.
x
Alignment, underline, box styles, and background
patterns cannot be mixed on a label. These styles are common
to the entire label.
To add a page break
1. Enter and format text for the first page of the label.
2. Press .
3. Use the arrow keys to select
H
press .
4. Continue entering and formatting text for the next page
of the label.
D.
Insert Format Break and
9