Using Tabs; Using Symbols And Special Characters; Adding Symbols - Dymo LabelManager 350D User Manual

Using Tabs

You can add tabs to a label to align text on multi-line labels. Tabs
are left justified and the default spacing is 50 mm (2.0").
To change the tab spacing
1. Press .
Settings
2. Use the arrow keys to select
H
.
3. Use the up and down arrow keys to increase or decrease the
tab setting, and then press
To insert a tab
1. Enter your text.
æ
2. Press the key and continue entering text.
Using Symbols and Special
Characters
Symbols and other special characters can be added to your
labels.

Adding Symbols

The label maker supports the extended symbol set as shown
in Figure 9.
To add a symbol
1. Press .
The first row of symbols shown in the table appears in the
display.
2. Use the arrow keys to move to the desired symbol.
The left and right arrows scroll horizontally along the row
of symbols. The up and down arrow keys scroll vertically
through the rows of symbols. To quickly see a row of symbols,
you can press the letter corresponding to the row you want.
3. When you locate the desired symbol, press
symbol to your label text.
10
Set Tab Length and press
H
.
H
to add the
Figure 9