Previewing Your Label; Aligning The Text; Changing The Cutting Option; Adjusting The Print Contrast - Dymo LabelManager 350D User Manual

Previewing Your Label

You can preview the text or format of your label prior to
printing. A multiple-line label is previewed as a single-line.
To preview your label
1. Press .
2. Use the down arrow key to select
H
press .
3. Use the arrow keys to select
If you select Text, the text of the label scrolls across the
display. If you select Format, the format selected displays
briefly.

Aligning the Text

When you print a fixed length label you can choose to align the
text at the left, center, or right side of the label. For multi-line
labels, all lines of text are aligned left, center, or right relative
to each other.
To align the text
F +
1. Press .
2. Use the arrow keys to select the desired alignment and
H
press .
6
3. Press to turn off the alignment setting.

Changing the Cutting Option

You can choose to have each label automatically cut after
printing or you can manually cut the labels using the Cutter
key. By default, labels are cut automatically. When manual
cutting is selected and you print multiple copies or serialized
labels, a dotted cut-line is printed between each label.
To change the cutting option
1. Press .
Settings
2. Use the arrow keys to select
3. Use the arrow keys to select
H
.
press
This setting will remain until you change it.

Adjusting the Print Contrast

You can adjust the print contrast to fine tune the print quality
of your label.
12
Print Preview and
Text or Format.
H
Set Auto Cut and press
Auto Cut On or Off, and then
To set the contrast
1. Press .
Settings
2. Use the arrow keys to select
3. Use the arrow keys to select one of the five contrast settings
H
and press

Using Label Maker Memory

The label maker has a powerful memory feature that stores
text and formatting as follows:
•
Automatically stores the last nine labels printed.
•
Allows you to store the text of up to nine labels you use
frequently.
•
Allows you to name and store up to nine commonly used
label formats.

Storing Label Text

The label maker automatically keeps the last nine labels
printed in a text buffer. In addition, you can store up to nine
specific labels you use frequently.
To store the current label text
1. Press .
Memory
2. Use the arrow keys to select
Nine fields, which represent memory locations, are
displayed. Fields that are filled indicate stored label text.
You can store new text in any of the memory locations,
however, if you select a location that is filled, the previous
label text will be overwritten.
3. Use the arrow keys to select a memory location and
H
press .
Your label text is saved and you are returned to the label.
.
Set Contrast and press
.
SAVE and then LABEL.
H.