12.2.3 Position of the overfeed foot
1
2
3
54
Regulation and inspection
The overfeed foot is adjusted at the factory so that light and
medium-weight material is laid on the feed dog in parallel.
The lay (inclination) can be altered to suit the material.
Caution: danger of injury
Turn off the main switch.
The inclination of the overfeed foot may only be adjusted with the
sewing machine switched off.
Adjustment
–
Undo threaded pins 2.
–
Insert the trunnion 3 further into the advance shaft 1 or partly
extract it.
This adjusts the inclination of the overfeed foot.
–
Retighten threaded pins 2.
IMPORTANT
After the inclination of the overfeed has been adjusted the lift must be
checked and corrected if necessary.
See section 12.2.2.