Auto Mode (P-Way Model); Gas Mode (2-Way Model); Auto Mode (3-Way Model); Gas Mode (3-Way Model) - Dometic RM2607 Service Tips Manual

2-WAY DISPLAY PANEL
D
B
C
E
ROYALE REFRIGERATOR OPERATION
MODELS INCLUDE: RM3662, RM3663, RM3662 and RM3863

AUTO MODE (P-WAY MODEL)

Press the AUTO mode selector button (2) to the DOWN position. If 120 volts AC is available, the AC mode
indicator lamp (B) will illuminate indicating AC operation. If 120 volts AC is not available, the GAS mode
indicator lamp (C) will illuminate and the control system will automatically switch to GAS operation.
If the CHECK indicator lamp (E) illuminates and the GAS mode indicator lamp (C) is OFF,
failed to ignite the burner in the GAS mode. GAS operation may be reset by pressing the main power ON/
OFF button (1) to the OFF then ON position. (See GAS MODE.)
Press the TEMPERATURE SELECTOR button (3) until the lamp at the desired position is illuminated.

GAS MODE (2-WAY MODEL)

Move the AUTO mode selector button (2) to the UP position. The GAS mode indicator lamp (C) will
illuminate. After 45 seconds the burner should be ignited and operating normally.
On the initial refrigerator start-up, it may take longer than 45 seconds to allow air to be purged from the
gas line. If the gas does not ignite within 45 seconds, the CHECK indicator lamp (E) will illuminate and the
GAS mode indicator lamp (C)will go off. To reset when the CHECK indicator lamp (E) is illuminated, press
the main power ON/OFF button (1) to the OFF and then ON position.
NOTE: DO NOT continue to reset GAS operation if the CHECK indicator lamp continues to be
illuminated after several tries.
Press the TEMPERATURE SELECTOR button (3) until the lamp (F) at the desired position is illuminated.

AUTO MODE (3-WAY MODEL)

Press the DC mode selector button (2) to the UP (OFF) position.
Move the AUTO mode selector button (3) to the DOWN position. If 120 volts AC is available, the AC
mode indicator lamp (B) will illuminate indicating AC operation. If 120 volts AC is not available, the GAS
mode indicator lamp (C) will illuminate and the control system will automatically switch to GAS operation.
If the CHECK indicator lamp (E) illuminates and the GAS mode indicator lamp (C) is off, the controls have
failed to ignite the burner in the GAS mode. GAS operation may be reset by pressing the main power ON/
OFF button (1) to the OFF then ON position. (See GAS MODE).
Press the TEMPERATURE SELECTOR button (4) until the lamp (F) at the desired position is illuminated.

GAS MODE (3-WAY MODEL)

Press the DC mode button (2) to the UP (OFF) position.
Move the AUTO mode selector button (3) to the UP position. The GAS mode indicator lamp (C) will
illuminate. After 45 seconds the burner should be ignited and operating normally.
On the initial refrigerator start-up, it may take longer than 45
If the gas does not ignite within 45
gas line.
GAS mode indicator lamp (C) will go off. To reset when the CHECK indicator lamp (E) is illuminated, press
the main power ON/OFF button (1) to the OFF and then ON position.
3-WAY DISPLAY PANEL
B C
seconds to allow air to be purged from the
the CHECK indicator lamp (E) will illuminate and the
seconds,
F
E
have
the controls