Running The Descaling Program - Sunbeam EM9300 Caffe Bellissimo Instruction Booklet

Cleaning and maintenance continued
Running the descaling program
The descaling program enables simple and
effective descaling of your coffee machine.
You should descale the coffee machine
at regular intervals, but at least when the
following symbol appears on the display:
The descaling process runs in 2 phases,
takes approx. 10 minutes and should not be
interrupted.
The frequency of descaling depends on
the hardness of the water in your region.
Therefore do not forget to determine the
water hardness and to set the corresponding
hardness for the coffee machine. Refer to
page 14 Determining the water hardness
and page 14 Setting and storing the water
hardness for instructions on this.
Caution: Avoid skin and eye contact with
descaling solution. Rinse off descaling
solution with clean water. Obtain medical
advice after eye contact. Remove any
splashes immediately of descaling solution
on the appliance as it can damage delicate
surfaces.
38
To run the descaling program, follow the
instructions on the display and proceed as
follows:
Press the Q menu button. The following
appears on the display:
I
"5
6 6
6 6
OK
-.
Press the (C) button until the "Descaling
program" menu appears for selection. The
following appears on the display:
Press thesbutton to start running the
descaling program.
L
OK