Running The Cleaning Program - Sunbeam EM9300 Caffe Bellissimo Instruction Booklet

Cleaning and maintenance continued
Running the cleaning program
The cleaning program enables intensive
cleaning of otherwise inaccessible areas.
The cleaning program must be started when
the following symbol appears on the display:
Important: The cleaning process takes approx.
8 minutes and should not be interrupted.
Before running the cleaning program, the
metal sieves in the brewing unit must be
clean and wiped dry. Follow steps provided
on page 30 'Cleaning the brewing unit'.
If the water level drops too low during
the cleaning program, the coffee machine
switches off.
To run the cleaning program, follow the
instructions on the display and these steps:
Press the e menu button. The following
appears on the display:
Lir5 6 6
6 6
+ OK
Press the (C) button until the "Cleaning
program" menu appears for selection. The
following appears on the display:
36
Press the® button to select the cleaning
program. The following then appears on the
display:
Remove the water tank, fill it with 1 litre of
water and push it back in.
The following appears on the display:
Open the lid of the coffee bean container
and the coffee powder shaft.
Put a cleaning tablet into the coffee
powder shaft.
Then press the 8 button.
The following appears on the display:
4M7/-1
66'