Hot Water Function - Sunbeam EM9300 Caffe Bellissimo Instruction Booklet

Hot water function
Important: There is a risk of scalding from hot
splashing water. Avoid direct contact with
skin.
To prepare hot water:
Select the "hot water" function by pressing
the (B) button El. The following appears
on the display:
1=1)
Place a glass/cup under the coffee
dispensing spout.
Select the desired cup size by pressing the
(C) button. The following selections are
possible:
IN) Coffee mug
Coffee cup
Espresso cup
a pprox. 190
ml
a pprox. 120
ml
approx. 40
ml
In order to reduce heat loss and splashing,
adjust the height of the dispenser to suit
your cup size by moving it up or down.
See Figure 14.
Note: If the height adjuster is difficult to
move, clean it. Follow the instructions on
page 31, Cleaning the dispensing unit.
Press thesbutton to dispense hot water.
Note: You can stop hot water dispensing
prematurely by briefly pressing the ()menu
button.