Applying Power To The Hp Server; Connecting The Power Cords - HP Tc2110 - Server - 128 MB RAM Maintenance Manual

Chapter 1

Applying Power to the HP Server

If you choose to use sleep states in conjunction with the HP Server tc2110, refer to "Sleep States (ACPI)"
later in this section and your respective NOS.

Connecting the Power Cords

WARNING
For your safety always connect equipment to a grounded wall outlet. Always use a power
cord with a properly grounded plug, such as the one provided with the equipment, or one
in compliance with your national safety standards. This equipment can be disconnected
from the power by removing the power cord from the power outlet. This means the
equipment must be located close to an easily accessible power outlet.
4
Figure 1-3. Rear Panel and Ports
Controls and Indicators