Salus RT500RF Instruction Manual page 7

to increase
to
to cycle
10
• Press or to
select the program
set for Weekday /
Weekend to be
reviewed or adjusted.
• Press SET at any time during program set, this will
immediately return to Normal mode.
Press SELECT at any time to confirm the selection.
"Hour" is flashing to indicate that it is the selected item
to be adjusted.
Press SELECT at any
time to confirm the
selection. "Hour" is
flashing to indicate that
it is the selected item to
be adjusted.
• Press SELECT to select the items to be
reviewed or adjusted with the below sequences.
(Program 1) "hour" "minute" Setpoint temp
(Program 2) "hour" "minute" Setpoint temp
(Program 3) "hour" "minute" Setpoint temp
(Program 4) "hour" "minute" Setpoint temp
(Program 5) "hour" "minute" Setpoint temp
and then cycle back to (Program 1)
• Press SET at any time to confirm the setting
and return for program set selection.
11
7 days program selected
• 5 different sets of Time and Setpoint
temperature can be set for each Day of Week.
Total 35 settings.
• To review or change program, press SET in
Normal mode to enter Program Setting mode.
Program 1 of Monday, and "SET PROG" are
displayed. All other indicators are cleared. "Day
of Week" is flashing to indicate that it is the
selected item to be adjusted.
• Press or to
select the
program set for
Day of Week to
be reviewed or
adjusted.
• Press SET at any time during program set and
selection will immediately return to Normal mode.
• Press SELECT at any time to confirm the selection.
"Hour" is flashing
to indicate that
it is the selected
item to be
adjusted.
• Press "Set" to confirm at anytime to return.
12 13