Table of Contents
Advertisement
Following table is the setting of the
thermostat after reset or Power on:
Function
Operation Mode
Room Temperature
°C indicator
Clock
AM/PM indicator
Day of Week indicator M
Program
Setpoint Temperature Default factory setting
Program Number
indicator
SET indicator
PROG indicator
Frost Protection
indicator
Heat indicator
Low-Battery Warning
indicator
Output Relay
After reset or power on, the thermostat will operate in
Normal mode. Setpoint temperature is reset to default
setting. Room temperature is updated in 5 seconds and
the control process starts. Program Number is updated
to indicate the running program.
6
7
User Guide
Key
Status after Reset or Power on
Normal mode
22.0°C, to be renewed
within 5 seconds
BL/FROST Turn on backlight for 5 seconds,
On
12:00
SET
AM
SELECT
RESET
Default factory setting
This product requires 2 x AA size Alkaline batteries.
1
Initial Power Up or Reset
• After power up or RESET is pressed, the
Off
thermostat is reset.
Off
•
During system reset, all LCD segments are turned on
Off
for 2 seconds after which the Control Centre is
initialized.
Off
• Once initialized the following display is shown.
Off, to be renewed
• The default Program
within 5 seconds
Set-point
Off
temperatures are set
after reset. Same for
both 5-2 and 7 days
program.
Function
Increase Setpoint Temperature
Decrease Setpoint Temperature
activate/de-activate Frost Protection
Key for Clock/Program settings
Key for Clock/Program settings
System reset
8
9
Hide quick links:
Advertisement
Table of Contents
